Multi-mode relay for 433 MHz wireless alarm

This relay switch can be controlled:

• with a remote control (2 provided)
• by the Euro Security Protect alarm panel
• by a motion detector, door opening detector, smoke or gas detector

It allows triggering one or more security devices such as sirens, fog generators, active sound barriers, light devices, or simply domestic appliances.

Triggering can occur when an alarm is detected by the control panel.
It can also be triggered manually with a remote control.
Finally, triggering can be scheduled at programmed times on the control panel.

The relay block must be powered by 12V DC.
It can switch voltages from 5V to 30V DC, and from 125 to 250V AC, as long as the current does not exceed 10A.
It can also be used as a dry contact, for example with fog generators that don't require trigger voltage.

The relay has 5 modes:

• Real-time: The relay is activated only while the remote control button is pressed. It is deactivated when the button is released.
• Self-locking: One pulse activates the relay. A second pulse deactivates it.
• Interlocking: On the remote control, button A activates the relay, button B deactivates it. This mode is most common when the relay is used with the control panel.
  In case of alarm, the control panel triggers the relay and deactivates it when disarmed.
  Use this mode for one or more sirens, disorientation light devices, or magnetic locks.
• 5-second activation: Pressing the remote control button will activate the relay for 5 seconds. Used with the control panel, this mode allows triggering of devices activated on rising edge, such as sound barriers, smart sirens activated by single pulse, and fog generators.
• 10-second activation: Pressing the remote control button will activate the relay for 10 seconds.
• 15-second activation: Pressing the remote control button will activate the relay for 15 seconds.
• 20-second activation: Pressing the remote control button will activate the relay for 20 seconds.

Remote Control Pairing

Real-time Mode

• Press the learning button
• The LED indicator flashes once then stays lit
• Press the button on the remote control to pair
• The LED indicator flashes 3 times to confirm

Self-locking Mode

• Press the learning button twice
• The LED indicator flashes twice then stays lit
• Press the button on the remote control to pair
• The LED indicator flashes 3 times to confirm

Interlocking Mode

• Press the learning button 3 times
• The LED indicator flashes 3 times then stays lit
• Press button "A" on the remote control
• The LED indicator flashes 3 times
• Press button "B" on the remote control
• The LED indicator flashes 3 times to confirm

5-second delay Mode

• Press the learning button 4 times
• The LED indicator flashes 4 times then stays lit
• Press the button on the remote control to pair
• The LED indicator flashes 3 times to confirm

10-second delay Mode

• Press the learning button 5 times
• The LED indicator flashes 5 times then stays lit
• Press the button on the remote control to pair
• The LED indicator flashes 3 times to confirm

15-second delay Mode

• Press the learning button 6 times
• The LED indicator flashes 6 times then stays lit
• Press the button on the remote control to pair
• The LED indicator flashes 3 times to confirm

20-second delay Mode

• Press the learning button 7 times
• The LED indicator flashes 7 times then stays lit
• Press the button on the remote control to pair
• The LED indicator flashes 3 times to confirm

Clearing Codes

• Hold the learning button for 5 seconds

All paired devices will be cleared.

Pairing with the control panel in interlocking mode (sirens, lights, and magnetic locks)

• On the control panel, click Menu, Accessories, then Alarm socket
• Press the relay pairing button 3 times. The LED indicator flashes 3 times then stays lit
• Click the left icon on the control panel (ON)
• The LED indicator flashes 3 times
• Click the right icon on the control panel (OFF)
• The LED indicator flashes 3 times. Pairing is complete

Pairing with the control panel in 5-second delay mode (sound barrier, smart siren activated by pulse, fog generator)

• On the control panel, click Menu, Accessories, then Alarm socket
• Press the relay pairing button 4 times. The LED indicator flashes 4 times then stays lit
• Click the left icon on the control panel (ON)
• The LED indicator flashes 3 times
• Click the right icon on the control panel (OFF)
• The LED indicator flashes 3 times. Pairing is complete